-
(no author) authored
added correction to save the path to the doc page so it can be used when generating the variable report; also fixed bug with float values being overridden when data types were changed git-svn-id: https://svn.ssec.wisc.edu/repos/glance/trunk@120 8a9318a1-56ba-4d59-b755-99d26321be01
(no author) authoredadded correction to save the path to the doc page so it can be used when generating the variable report; also fixed bug with float values being overridden when data types were changed git-svn-id: https://svn.ssec.wisc.edu/repos/glance/trunk@120 8a9318a1-56ba-4d59-b755-99d26321be01
variablereport.txt 9.75 KiB
<%doc>
This Mako template is intended to create a variable specific report page for glance reportGen.
Created by Eva Schiffer Jun 2009.
Copyright (c) 2009 University of Wisconsin SSEC. All rights reserved.
</%doc>
<%!
import glance.report as report
%>
## we will use this stuff often, so hang on to it
<%
variableName = runInfo['variable_name']
variableDisplayName = variableName
if (runInfo.has_key('display_name')):
variableDisplayName = runInfo['display_name']
hideComparisonImages = ('short_circuit_diffs' in runInfo) and runInfo['short_circuit_diffs']
%>
<title>${variableDisplayName} Variable Comparison</title>
</head>
<body>
<h1>${variableDisplayName} Variable Comparison</h1>
<p>
% if 'version' in runInfo :
report produced with ${runInfo['version']} <br>
% endif
comparison generated ${runInfo['time']} by user ${runInfo['user']} on ${runInfo['machine']}
</p>
## show information on each of the files we're comparing (should only be two)
% for fileKey in sorted(list(files)) :
<% tempFileInfo = files[fileKey] %>
<p>
${fileKey}:
% if 'displayName' in tempFileInfo :
${tempFileInfo['displayName']}
% endif
<blockquote>
path: ${tempFileInfo['path']} <br>
md5sum for ${fileKey}: ${tempFileInfo['md5sum']} <br>
last modified: ${tempFileInfo['lastModifiedTime']}
</blockquote>
</p>
% endfor
## display info on the config file that was used, if one was
% if ('config_file_name' in runInfo) and (runInfo['config_file_name'] is not None) :
<p>
A configuration file was used to control the production report.<br>
Please see <a href="${runInfo['config_file_name']}">this copy of the configuration file</a>
for details.
</p>
% endif
## if the lon/lat variables exist, display info on them
%if ('latitude' in runInfo) and ('longitude' in runInfo) :
## display the latitude and longitude variable names
<p>
% if ('latitude_alt_name_in_b' in runInfo) :
latitude in A: ${runInfo['latitude']}<br>
latitude in B: ${runInfo['latitude_alt_name_in_b']}<br>
% else :
latitude: ${runInfo['latitude']} <br>
% endif
% if ('longitude_alt_name_in_b' in runInfo) : longitude in A: ${runInfo['longitude']}<br>
longitude in B: ${runInfo['longitude_alt_name_in_b']}<br>
% else :
longitude: ${runInfo['longitude']}<br>
% endif
% if ('lon_lat_epsilon' in runInfo) and (runInfo['lon_lat_epsilon'] > 0.0) :
longitude/latitude comparison epsilon: ${runInfo['lon_lat_epsilon']}<br>
% endif
<br>
## display information about any data filtering on the lons/lats
% if ('data_filter_function_lat_in_a' in runInfo) and (not (runInfo['data_filter_function_lat_in_a'] is None)) :
Note: The latitude in file A was filtered.
Please see <a href="../${runInfo['config_file_name']}">this copy of
the original configuration file</a> to view the data filtering function.<br>
% endif
% if ('data_filter_function_lat_in_b' in runInfo) and (not (runInfo['data_filter_function_lat_in_b'] is None)) :
Note: The latitude in file B was filtered.
Please see <a href="../${runInfo['config_file_name']}">this copy of
the original configuration file</a> to view the data filtering function.<br>
% endif
% if ('data_filter_function_lon_in_a' in runInfo) and (not (runInfo['data_filter_function_lon_in_a'] is None)) :
Note: The longitude in file A was filtered.
Please see <a href="../${runInfo['config_file_name']}">this copy of
the original configuration file</a> to view the data filtering function.<br>
% endif
% if ('data_filter_function_lon_in_b' in runInfo) and (not (runInfo['data_filter_function_lon_in_b'] is None)) :
Note: The longitude in file B was filtered.
Please see <a href="../${runInfo['config_file_name']}">this copy of
the original configuration file</a> to view the data filtering function.<br>
% endif
</p>
## if there is a problem with the longitude/latitude correlation between the two files,
## make a nice big warning for the user
% if spatial.has_key('lon_lat_not_equal_points_count') and (spatial['lon_lat_not_equal_points_count'] > 0) :
<p>
WARNING: ${spatial['lon_lat_not_equal_points_count']} data points
(${report.make_formatted_display_string(spatial['lon_lat_not_equal_points_percent'])}% of all data)
show possible mismatch in values stored in file a
and file b longitude and latitude values. Depending on the degree of mismatch, some data value comparisons
in this report may be distorted or spatially nonsensical. Please consider re-running this report and including an
examination of your longitude and latitude variables with appropriate epsilons in order to analyze the significance
of the difference.<br>
## if we're showing images, link to graphs showing the problem
% if runInfo['shouldIncludeImages'] :
<a href="../LonLatMismatch.A.png">
View mismatching points in A's lon/lat system
</a><br>
<a href="../LonLatMismatch.B.png">
View mismatching points in B's lon/lat system
</a>
% endif
</p>
% endif
## end of the if to display lon/lat info
% endif
% if (len(imageNames['original']) > 0) :
<h3>Original Data</h3>
<p>
% for image in imageNames['original']:
<a href="./${image}"><img src="small.${image}"></a>
% endfor
</p>
% endif
<h3>Comparison Information</h3>
## comparison parameters
<p>
## display the variable names
% if 'alternate_name_in_B' in runInfo :
variable name in A: ${variableName} <br>
variable name in B: ${runInfo['alternate_name_in_B']} <br>
% else :
variable name: ${variableName} <br>
% endif
## display the epsilon
epsilon value: ${runInfo['epsilon']} <br>
## if there is an epsilon percent, also show that
% if ('epsilon_percent' in runInfo) and (runInfo['epsilon_percent'] is not None) :
epsilon percent: ${runInfo['epsilon_percent']}% <br>
% endif
## display the missing value
% if ('missing_value_alt_in_b' in runInfo) and (not (runInfo['missing_value_alt_in_b'] is runInfo['missing_value'])) :
"missing" data value in A: ${str(runInfo['missing_value'])}<br>
"missing" data value in B: ${str(runInfo['missing_value_alt_in_b'])}<br>
% else :
"missing" data value: ${str(runInfo['missing_value'])}<br>
% endif
<br>
## if the data was filtered, say so
% if ('data_filter_function_a' in runInfo) and (not (runInfo['data_filter_function_a'] is None)) :
Note: The data for this variable from file A was filtered.
Please see <a href="../${runInfo['config_file_name']}">this copy of
the original configuration file</a> to view the data filtering function.<br>
% endif
% if ('data_filter_function_b' in runInfo) and (not (runInfo['data_filter_function_b'] is None)) :
Note: The data for this variable from file B was filtered.
Please see <a href="../${runInfo['config_file_name']}">this copy of
the original configuration file</a> to view the data filtering function.<br>
% endif
</p>
<h3>Statistical Summary</h3>
## list out all of the statistics groups we have
<dl>
% for setName in sorted(list(statGroups)) :
<% dataSet = statGroups[setName] %>
<dt>
${setName}
</dt>
<dd>
% for statName, statValue in sorted(list(dataSet.items())) :
${statName}<a href="${runInfo['doc_path']}">*</a>: ${report.make_formatted_display_string(statValue)} <br>
% endfor
<br>
<dd>
% endfor
</dl>
% if (len(imageNames['compared']) > 0) and (not hideComparisonImages) :
<p>
<% inSubSet = False %>
% for image in imageNames['compared'] :
## if we have a plain image, display it
% if (type(image) is str) :
% if inSubSet :
<hr>
<% inSubSet = False %> % endif
<a href="./${image}"><img src="./small.${image}"></a>
## if we have a subset of images, separate it from the rest
% elif (type(image) is list) :
<% inSubSet = True %>
<hr>
<blockquote>
% for subImage in image :
<a href="./${subImage}"><img src="./small.${subImage}"></a>
% endfor
</blockquote>
% endif
% endfor
</p>
% endif
</body>
</html>